GATE 2015 Geology and Geophysics (GG) Question Paper with Answer Key PDF (February 1- Afternoon Session)

GATE Questions

• 1.

  The welding process commonly used for fabricating tailor-welded blanks of dissimilar thickness for automotive applications is

  • arc welding
    
  • laser welding
    
  • gas welding
    
  • friction welding
    
  View Solution

  ---

• 2.

  A truss structure is loaded as shown in the figure below. Among the options given, which member in the truss is a zero-force member?

  

  \[ {Given: } F = 1000\,{N} \]

  • \(BD\)
    
  • \(BC\)
    
  • \(BA\)
    
  • \(AD\)
  View Solution

  ---

• 3.

  Let A and B be real symmetric matrices of same size. Which one of the following options is correct?

  • \( (AB)^T = B^T A^T \)
    
  • \( AB = BA \)
    
  • \( A^T = A^{-1} \)
    
  • \( A = A^{-1} \)
    
  View Solution

  ---

• 4.

  If two unbiased coins are tossed, then what is the probability of having at least one head?
  

  • 0.25
    
  • 0.5
    
  • 0.675
    
  • 0.75
    
  View Solution

  ---

• 5.

  A plate of 30 mm thickness is fed through a rolling mill with two powered rolls. Each roll has a diameter of 500 mm. The plate thickness is to be reduced to 27 mm in a single pass. Assume no change in width. The process feasibility and the maximum draft (in mm) can be represented, respectively, as
  Use the coefficient of friction as 0.12

  • NOT feasible and 6.0
    
  • NOT feasible and 2.6
    
  • feasible and 3.6
    
  • feasible and 3.0
    
  View Solution

  ---

• 6.

  A vibrating system has a critical damping coefficient \(C_c = 350 \, \text{N}\cdot\text{s/m}\) and an actual damping coefficient \(C = 35 \, \text{N}\cdot\text{s/m}\). The logarithmic decrement of the system is approximately:

  • 0.10
    
  • 0.31
    
  • 0.63
    
  • 3.14
  View Solution