The Official MHT-CET Cutoff 2025 for KBTCOE has not been released yet. However, students can refer to the expected MHT-CET 2025 cutoff for KBTCOE, which is based on the trends observed in previous years cutoff.
KBTCOE MHT-CET Cutoff 2025 (Category Wise)
KBTCOE MHT-CET 2025 Expected Cutoff for EWS Category ranges between 5.91 - 91.53. For Round 1, KBTCOE MHT-CET 2025 is expected to be 5.91-88.64.
| Category | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| EWS | 5.91-88.64 | 5.91-91.53 |
| GOBCS | 60.29-89.99 | 60.29-91.71 |
| GOPENS | 65.44-90.65 | 65.44-94.21 |
| GSCS | 16.74-78.42 | 16.74-80.6 |
| GSTS | 2.35-72.1 | 2.35-80.47 |
| LOPENS | 60.6-92.04 | 60.6-92.84 |
| LSCS | 13.59-79.52 | 13.59-80.43 |
| LOBCS | 57.15-90.67 | 57.15-92.71 |
| LSTS | 4.73-68.49 | 1.19-83.11 |
| GNT2S | 28.85-86.12 | 28.85-86.12 |
| GVJS | 34.58-82.7 | 34.58-82.7 |
| TFWS | 65.94-94.62 | 63.94-95.85 |
| DEFOPENS | 33.16-84.23 | 16.94-84.23 |
| GNT1S | 31.62-86.86 | 31.62-86.86 |
| LNT2S | 38.54-92.04 | 38.34-92.04 |
| LVJS | 34.2-80.6 | 14.91-81.58 |
| DEFOBCS | 21.35-79.99 | 21.35-79.99 |
| GNT3S | 60.23-89.71 | 59.98-89.71 |
| LNT1S | 38.88-87.14 | 2.44-87.14 |
| LNT3S | 60.32-89.95 | 60.32-89.95 |
| DEFROBCS | 22.17-77.83 | 16.17-81.49 |
| DEFSCS | 45.36-45.36 | 31.93-77.95 |
| DEFRNT3S | 71.66-71.66 | 71.66-71.66 |
| PWDOPENS | 7.32-25.78 | 7.32-91.44 |
| ORPHAN | - | 66.39-91.13 |
| PWDOBCS | - | 68.11-91.95 |
| GOPENH | 44.98-91.25 | 17.66-92.48 |
| GOPENO | 27.15-89.85 | 2-90.9 |
| GOBCO | 4.86-89.4 | 4.86-90.13 |
| LSCH | 20.23-87.02 | 20.23-87.02 |
| GOBCH | 30.3-90.52 | 19.26-90.52 |
| LOPENH | 23.22-91.91 | 23.22-92.05 |
| GNT1O | 31.65-67.57 | 31.65-67.57 |
| GNT3H | 17.65-88.67 | 0.98-88.67 |
| LOBCH | 9.75-91.22 | 9.75-91.22 |
| LOBCO | 8.28-90.18 | 8.28-90.18 |
| GSCH | 1.93-81.03 | 1.93-87.12 |
| LOPENO | 8.81-91.69 | 1.58-91.69 |
| GNT2H | 5.12-88.75 | 5.12-88.8 |
| GSTH | 6.65-72.7 | 6.65-86.01 |
| LSCO | 9.19-87.93 | 9.19-87.93 |
| LNT2O | 39.79-39.79 | 39.79-39.79 |
| LVJO | 63.69-63.69 | 63.69-63.69 |
| GSCO | 5.37-82.46 | 5.37-82.46 |
| LNT2H | 35.17-80.99 | 34.14-80.99 |
| GVJH | 13.19-81.51 | 1.42-81.51 |
| LNT1H | 1.42-46.45 | 1.42-46.45 |
| LNT3H | 26.05-42.55 | 26.05-42.55 |
| PWDOPENH | 66.95-77.06 | 66.95-88.62 |
| GNT1H | 5.69-88.07 | 5.69-88.07 |
| LSTH | 16.58-79.95 | 16.58-79.95 |
| GSTO | 6.19-74.97 | 6.19-78.41 |
| LVJH | 24.54-81.86 | 24.54-81.86 |
| GVJO | 17.43-86.17 | 17.43-86.17 |
| GNT2O | 11.29-79.59 | 11.29-79.59 |
| DEFRSCS | 58.55-62.49 | 58.55-63.69 |
| GNT3O | 41.91-78 | 41.91-78 |
| LNT1O | 79.79-79.79 | 79.79-79.79 |
| LSTO | 42.3-42.3 | 42.3-42.3 |
| LNT3O | 7.55-7.55 | 7.55-7.55 |
| AI | - | 8.39-21.51 |
Also Check:
KBTCOE MHT-CET Cutoff 2025 (Course Wise)
KBTCOE MHT-CET Cutoff 2025 for EWS Category
BE Computer Engineering Cutoff for MHT-CET (EWS Category) expected to fall in the range between 73.63-91.53, which makes it the most in-demand course for KBTCOE. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for EWS Category with expected range of 54.43-84.52. You can check course wise expected MHT-CET 2025 cutoff for EWS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 73.63-88.64 | 73.63-91.53 |
| BE Artificial Intelligence and Data Science | 59.98-80.08 | 54.43-84.52 |
| BE (Information Technology) | 35.16-84.88 | 35.16-86.7 |
| BE Electrical Engineering | 22.36-22.36 | 22.36-34.9 |
| BE Electronics & Telecom Engineering | 17.68-76.62 | 17.68-79.54 |
| BE Instrumentation & Control Engineering | 32-47.44 | 17.68-56.15 |
| BE Robotics and Automation | 16.69-16.69 | 13.31-29.53 |
| BE Civil Engineering | 10.56-30.67 | 10.56-65.33 |
| BE Mechanical Engineering | 5.91-46.45 | 5.91-59.68 |
KBTCOE MHT-CET Cutoff 2025 for GOBCS Category
BE Computer Engineering Cutoff for MHT-CET (GOBCS Category) expected to fall in the range between 89.71-91.71, which makes it the most in-demand course for KBTCOE. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GOBCS Category with expected range of 86.54-90.67. You can check course wise expected MHT-CET 2025 cutoff for GOBCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 89.71-89.99 | 89.71-91.71 |
| BE (Information Technology) | 86.68-87.45 | 86.54-90.67 |
| BE Artificial Intelligence and Data Science | 86.09-86.68 | 86.09-90.51 |
| BE Electronics & Telecom Engineering | 81.13-82.78 | 80.97-87.63 |
| BE Robotics and Automation | 75.65-75.65 | 75.65-83.44 |
| BE Electrical Engineering | 75.16-75.16 | 75.16-77.95 |
| BE Instrumentation & Control Engineering | 69.28-73.63 | 68.91-78.22 |
| BE Mechanical Engineering | 65.55-72.74 | 65.55-84.87 |
| BE Civil Engineering | 60.29-67.82 | 60.29-71.66 |
KBTCOE MHT-CET Cutoff 2025 for GOPENS Category
BE Computer Engineering Cutoff for MHT-CET (GOPENS Category) expected to fall in the range between 90.38-94.21, which makes it the most in-demand course for KBTCOE. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GOPENS Category with expected range of 87.3-90.93. You can check course wise expected MHT-CET 2025 cutoff for GOPENS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 90.38-90.65 | 90.38-94.21 |
| BE (Information Technology) | 87.32-87.59 | 87.3-90.93 |
| BE Artificial Intelligence and Data Science | 86.86-87.57 | 86.86-90.94 |
| BE Electronics & Telecom Engineering | 82.37-83.58 | 82.37-89.99 |
| BE Robotics and Automation | 78.17-78.17 | 78.17-83.49 |
| BE Electrical Engineering | 76.9-76.9 | 76.9-78.34 |
| BE Instrumentation & Control Engineering | 71.6-76.53 | 70.89-81.05 |
| BE Mechanical Engineering | 69.63-74.54 | 69.63-79.13 |
| BE Civil Engineering | 65.44-71.85 | 65.44-75.36 |
KBTCOE MHT-CET Cutoff 2025 for GSCS Category
BE Computer Engineering Cutoff for MHT-CET (GSCS Category) expected to fall in the range between 77.21-80.6, which makes it the most in-demand course for KBTCOE. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GSCS Category with expected range of 70.51-78.22. You can check course wise expected MHT-CET 2025 cutoff for GSCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 78.22-78.42 | 77.21-80.6 |
| BE (Information Technology) | 70.51-73.89 | 70.51-78.22 |
| BE Artificial Intelligence and Data Science | 72.84-77.13 | 68.47-77.13 |
| BE Electronics & Telecom Engineering | 61.8-65.44 | 60.07-68.49 |
| BE Electrical Engineering | 47.8-47.8 | 47.8-70.51 |
| BE Robotics and Automation | 47.78-47.78 | 47.78-60.88 |
| BE Mechanical Engineering | 44.48-50.7 | 44.48-63.29 |
| BE Civil Engineering | 33.08-38.88 | 29.53-67.15 |
| BE Instrumentation & Control Engineering | 16.74-44.26 | 16.74-44.26 |
KBTCOE MHT-CET Cutoff 2025 for GSTS Category
BE Robotics and Automation Cutoff for MHT-CET (GSTS Category) expected to fall in the range between 80.47-80.47, which makes it the most in-demand course for KBTCOE. Furthermore,BE Computer Engineering is expected to be the second most preferred course for GSTS Category with expected range of 51.57-65.44. You can check course wise expected MHT-CET 2025 cutoff for GSTS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Robotics and Automation | - | 80.47-80.47 |
| BE Computer Engineering | 51.57-65.44 | 51.57-65.44 |
| BE Civil Engineering | 45.34-47.89 | 43.03-61.13 |
| BE Artificial Intelligence and Data Science | 45.52-53.27 | 42.22-64.26 |
| BE (Information Technology) | 28.28-47.63 | 28.28-61.89 |
| BE Instrumentation & Control Engineering | 21.04-72.1 | 21.04-72.1 |
| BE Electronics & Telecom Engineering | 6.04-42.74 | 6.04-42.74 |
| BE Electrical Engineering | 37.63-37.63 | 4.73-37.63 |
| BE Mechanical Engineering | 2.35-24.95 | 2.35-24.95 |
KBTCOE MHT-CET Cutoff 2025 for LOPENS Category
BE Computer Engineering Cutoff for MHT-CET (LOPENS Category) expected to fall in the range between 91.55-92.84, which makes it the most in-demand course for KBTCOE. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LOPENS Category with expected range of 88.36-92.01. You can check course wise expected MHT-CET 2025 cutoff for LOPENS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 91.55-92.04 | 91.55-92.84 |
| BE (Information Technology) | 88.36-88.87 | 88.36-92.01 |
| BE Artificial Intelligence and Data Science | 87.45-88.08 | 87.45-90.97 |
| BE Robotics and Automation | 83.34-83.34 | 83.34-83.72 |
| BE Electronics & Telecom Engineering | 82.88-85.45 | 82.88-88.7 |
| BE Electrical Engineering | 79.03-79.03 | 78.62-80.72 |
| BE Instrumentation & Control Engineering | 77.21-79.98 | 77.17-81.05 |
| BE Mechanical Engineering | 66.19-71.58 | 66.19-78.58 |
| BE Civil Engineering | 60.6-70.2 | 60.6-70.2 |
KBTCOE MHT-CET Cutoff 2025 for LSCS Category
BE Computer Engineering Cutoff for MHT-CET (LSCS Category) expected to fall in the range between 77.54-80.06, which makes it the most in-demand course for KBTCOE. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LSCS Category with expected range of 72.74-80.43. You can check course wise expected MHT-CET 2025 cutoff for LSCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 79.3-79.52 | 77.54-80.06 |
| BE (Information Technology) | 73.26-76.48 | 72.74-80.43 |
| BE Artificial Intelligence and Data Science | 70.25-75.17 | 69.63-75.36 |
| BE Electronics & Telecom Engineering | 65.9-68.48 | 60.44-68.48 |
| BE Robotics and Automation | 62.14-62.14 | 58.69-62.14 |
| BE Electrical Engineering | 48.56-48.56 | 48.56-58.44 |
| BE Civil Engineering | 28.7-33.47 | 28.2-37.21 |
| BE Instrumentation & Control Engineering | 22.89-51.22 | 22.89-51.22 |
| BE Mechanical Engineering | 13.59-55.27 | 13.59-55.27 |
KBTCOE MHT-CET Cutoff 2025 for LOBCS Category
BE Computer Engineering Cutoff for MHT-CET (LOBCS Category) expected to fall in the range between 90.07-92.71, which makes it the most in-demand course for KBTCOE. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LOBCS Category with expected range of 87.56-89.68. You can check course wise expected MHT-CET 2025 cutoff for LOBCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 90.07-90.67 | 90.07-92.71 |
| BE (Information Technology) | 87.56-87.92 | 87.56-89.68 |
| BE Artificial Intelligence and Data Science | 87.1-87.14 | 87.1-87.3 |
| BE Electronics & Telecom Engineering | 82.33-83.74 | 82.33-84.32 |
| BE Robotics and Automation | 77.16-77.16 | 77.16-85.42 |
| BE Electrical Engineering | 76.68-76.68 | 76.68-78.43 |
| BE Instrumentation & Control Engineering | 69.8-76.27 | 69.8-79.69 |
| BE Mechanical Engineering | 63.54-68.47 | 63.54-75.36 |
| BE Civil Engineering | 57.15-68.11 | 57.15-68.11 |
KBTCOE MHT-CET Cutoff 2025 for LSTS Category
BE Artificial Intelligence and Data Science Cutoff for MHT-CET (LSTS Category) expected to fall in the range between 54.75-68.49, which makes it the most in-demand course for KBTCOE. Furthermore,BE Computer Engineering is expected to be the second most preferred course for LSTS Category with expected range of 51.7-69.27. You can check course wise expected MHT-CET 2025 cutoff for LSTS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Artificial Intelligence and Data Science | 54.75-68.49 | 54.75-68.49 |
| BE Computer Engineering | 66.02-68.12 | 51.7-69.27 |
| BE Robotics and Automation | - | 42.74-42.74 |
| BE (Information Technology) | 34.9-51.28 | 34.9-51.28 |
| BE Electronics & Telecom Engineering | 21.62-43.2 | 21.62-83.11 |
| BE Instrumentation & Control Engineering | 31.62-31.62 | 19.82-31.62 |
| BE Mechanical Engineering | 14.74-14.74 | 8.85-76.77 |
| BE Electrical Engineering | 4.73-4.73 | 4.73-35.99 |
| BE Civil Engineering | 35.44-36.93 | 1.19-54.57 |
KBTCOE MHT-CET Cutoff 2025 for GNT2S Category
BE Computer Engineering Cutoff for MHT-CET (GNT2S Category) expected to fall in the range between 81.94-86.12, which makes it the most in-demand course for KBTCOE. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for GNT2S Category with expected range of 79.41-81.94. You can check course wise expected MHT-CET 2025 cutoff for GNT2S Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 84.88-86.12 | 81.94-86.12 |
| BE Artificial Intelligence and Data Science | 79.41-81.94 | 79.41-81.94 |
| BE (Information Technology) | 81.94-84.64 | 78.62-84.64 |
| BE Electronics & Telecom Engineering | 73.62-75.01 | 70.62-79.35 |
| BE Electrical Engineering | 63.29-63.29 | 63.29-74.54 |
| BE Robotics and Automation | 62.92-62.92 | 62.92-62.92 |
| BE Civil Engineering | 47.36-56.96 | 47.36-56.96 |
| BE Mechanical Engineering | 47.01-62.86 | 47.01-62.86 |
| BE Instrumentation & Control Engineering | 28.85-38.88 | 28.85-38.88 |
KBTCOE MHT-CET Cutoff 2025 for GVJS Category
BE Computer Engineering Cutoff for MHT-CET (GVJS Category) expected to fall in the range between 77.23-82.7, which makes it the most in-demand course for KBTCOE. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for GVJS Category with expected range of 75.17-80.59. You can check course wise expected MHT-CET 2025 cutoff for GVJS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 79.6-82.7 | 77.23-82.7 |
| BE Artificial Intelligence and Data Science | 75.21-79.41 | 75.17-80.59 |
| BE (Information Technology) | 73.8-80.63 | 73.8-80.86 |
| BE Electronics & Telecom Engineering | 66.3-68.18 | 66.3-77.6 |
| BE Civil Engineering | 48.06-49.6 | 47.63-68.11 |
| BE Mechanical Engineering | 42.22-56.29 | 42.22-56.29 |
| BE Robotics and Automation | 39.33-39.33 | 39.33-71.58 |
| BE Electrical Engineering | 39.23-39.23 | 39.23-39.23 |
| BE Instrumentation & Control Engineering | 34.58-64.26 | 34.58-64.26 |
KBTCOE MHT-CET Cutoff 2025 for TFWS Category
BE Computer Engineering Cutoff for MHT-CET (TFWS Category) expected to fall in the range between 92.31-94.62, which makes it the most in-demand course for KBTCOE. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for TFWS Category with expected range of 89.18-91.47. You can check course wise expected MHT-CET 2025 cutoff for TFWS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 92.31-94.62 | 92.31-94.62 |
| BE Artificial Intelligence and Data Science | 89.18-90.62 | 89.18-91.47 |
| BE (Information Technology) | 89.04-92.02 | 89.04-94.85 |
| BE Robotics and Automation | 82.39-82.39 | 82.39-82.39 |
| BE Electrical Engineering | 81.28-81.28 | 81.28-81.28 |
| BE Electronics & Telecom Engineering | 77.8-87.66 | 77.72-89.82 |
| BE Mechanical Engineering | 69.52-81.37 | 69.52-90.69 |
| BE Civil Engineering | 65.94-83.72 | 65.94-83.72 |
| BE Instrumentation & Control Engineering | 73.81-79.69 | 63.94-95.85 |
KBTCOE MHT-CET Cutoff 2025 for DEFOPENS Category
BE (Information Technology) Cutoff for MHT-CET (DEFOPENS Category) expected to fall in the range between 68.53-78.28, which makes it the most in-demand course for KBTCOE. Furthermore,BE Computer Engineering is expected to be the second most preferred course for DEFOPENS Category with expected range of 65.87-84.23. You can check course wise expected MHT-CET 2025 cutoff for DEFOPENS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | 68.53-78.28 | 68.53-78.28 |
| BE Computer Engineering | 65.87-84.23 | 65.87-84.23 |
| BE Artificial Intelligence and Data Science | 71.27-73.63 | 65.04-73.63 |
| BE Robotics and Automation | 57.4-57.4 | 57.4-57.4 |
| BE Instrumentation & Control Engineering | 56.56-56.74 | 56.56-74.54 |
| BE Electrical Engineering | 64.35-64.35 | 50.7-64.35 |
| BE Civil Engineering | 50.97-50.97 | 46.86-72.5 |
| BE Mechanical Engineering | 36.08-51.1 | 36.08-81.16 |
| BE Electronics & Telecom Engineering | 33.16-69.47 | 16.94-69.47 |
KBTCOE MHT-CET Cutoff 2025 for GNT1S Category
BE Computer Engineering Cutoff for MHT-CET (GNT1S Category) expected to fall in the range between 85.1-86.86, which makes it the most in-demand course for KBTCOE. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for GNT1S Category with expected range of 81.49-83.64. You can check course wise expected MHT-CET 2025 cutoff for GNT1S Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 85.1-86.86 | 85.1-86.86 |
| BE Artificial Intelligence and Data Science | 81.49-82.78 | 81.49-83.64 |
| BE (Information Technology) | 79.99-85.38 | 79.99-85.38 |
| BE Electronics & Telecom Engineering | 77.16-77.64 | 73.63-77.64 |
| BE Robotics and Automation | 71.82-71.82 | 66.3-71.82 |
| BE Electrical Engineering | 66.3-66.3 | 66.3-66.3 |
| BE Civil Engineering | 54.43-60.13 | 54.43-68.24 |
| BE Mechanical Engineering | 49.4-51.79 | 49.4-70.41 |
| BE Instrumentation & Control Engineering | 31.62-68.24 | 31.62-68.24 |
KBTCOE MHT-CET Cutoff 2025 for LNT2S Category
BE Computer Engineering Cutoff for MHT-CET (LNT2S Category) expected to fall in the range between 81.37-92.04, which makes it the most in-demand course for KBTCOE. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LNT2S Category with expected range of 79.99-79.99. You can check course wise expected MHT-CET 2025 cutoff for LNT2S Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 81.37-92.04 | 81.37-92.04 |
| BE (Information Technology) | 79.99-79.99 | 79.99-79.99 |
| BE Artificial Intelligence and Data Science | 73.56-75.36 | 73.56-75.36 |
| BE Electronics & Telecom Engineering | 71.56-71.56 | 71.56-73.26 |
| BE Mechanical Engineering | 50.04-59.32 | 50.04-59.32 |
| BE Instrumentation & Control Engineering | 38.54-38.54 | 38.54-47.42 |
| BE Civil Engineering | 50.97-50.97 | 38.34-50.97 |
KBTCOE MHT-CET Cutoff 2025 for LVJS Category
BE Computer Engineering Cutoff for MHT-CET (LVJS Category) expected to fall in the range between 75.8-75.8, which makes it the most in-demand course for KBTCOE. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LVJS Category with expected range of 74.54-79. You can check course wise expected MHT-CET 2025 cutoff for LVJS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 75.8-75.8 | 75.8-75.8 |
| BE (Information Technology) | 74.54-79 | 74.54-79 |
| BE Artificial Intelligence and Data Science | 72.38-77.84 | 72.38-81.58 |
| BE Electronics & Telecom Engineering | 63.96-80.6 | 63.96-80.6 |
| BE Mechanical Engineering | 34.2-39.9 | 34.2-39.9 |
| BE Robotics and Automation | 62.92-62.92 | 15.44-65.52 |
| BE Civil Engineering | 35.38-43.03 | 14.91-43.03 |
KBTCOE MHT-CET Cutoff 2025 for DEFOBCS Category
BE Computer Engineering Cutoff for MHT-CET (DEFOBCS Category) expected to fall in the range between 73.58-79.99, which makes it the most in-demand course for KBTCOE. Furthermore,BE Civil Engineering is expected to be the second most preferred course for DEFOBCS Category with expected range of 72.1-72.1. You can check course wise expected MHT-CET 2025 cutoff for DEFOBCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 73.58-79.99 | 73.58-79.99 |
| BE Civil Engineering | - | 72.1-72.1 |
| BE (Information Technology) | 67.62-67.82 | 67.62-67.82 |
| BE Artificial Intelligence and Data Science | 65.9-71.77 | 65.9-71.77 |
| BE Electronics & Telecom Engineering | 60.63-60.63 | 60.63-60.63 |
| BE Mechanical Engineering | - | 32.17-71.4 |
| BE Instrumentation & Control Engineering | 21.35-21.35 | 21.35-21.35 |
KBTCOE MHT-CET Cutoff 2025 for GNT3S Category
BE Computer Engineering Cutoff for MHT-CET (GNT3S Category) expected to fall in the range between 88.02-89.71, which makes it the most in-demand course for KBTCOE. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for GNT3S Category with expected range of 87.32-87.32. You can check course wise expected MHT-CET 2025 cutoff for GNT3S Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 88.02-89.71 | 88.02-89.71 |
| BE Artificial Intelligence and Data Science | 87.32-87.32 | 87.32-87.32 |
| BE (Information Technology) | 86.23-86.24 | 86.23-86.24 |
| BE Electronics & Telecom Engineering | 79.7-82.48 | 79.7-82.48 |
| BE Robotics and Automation | 75.17-75.17 | 75.17-75.17 |
| BE Electrical Engineering | 70.62-70.62 | 70.62-70.62 |
| BE Mechanical Engineering | 65.29-71.58 | 65.29-78.01 |
| BE Civil Engineering | 60.23-60.23 | 59.98-60.23 |
KBTCOE MHT-CET Cutoff 2025 for LNT1S Category
BE Computer Engineering Cutoff for MHT-CET (LNT1S Category) expected to fall in the range between 81.93-87.14, which makes it the most in-demand course for KBTCOE. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LNT1S Category with expected range of 79-80.36. You can check course wise expected MHT-CET 2025 cutoff for LNT1S Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 81.93-87.14 | 81.93-87.14 |
| BE (Information Technology) | 79-80.36 | 79-80.36 |
| BE Electronics & Telecom Engineering | 70.51-70.51 | 70.5-70.51 |
| BE Mechanical Engineering | 38.88-54.57 | 38.88-54.57 |
| BE Electrical Engineering | 66.3-66.3 | 2.44-66.3 |
KBTCOE MHT-CET Cutoff 2025 for LNT3S Category
BE Computer Engineering Cutoff for MHT-CET (LNT3S Category) expected to fall in the range between 89.95-89.95, which makes it the most in-demand course for KBTCOE. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LNT3S Category with expected range of 86.68-86.68. You can check course wise expected MHT-CET 2025 cutoff for LNT3S Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 89.95-89.95 | 89.95-89.95 |
| BE (Information Technology) | 86.68-86.68 | 86.68-86.68 |
| BE Artificial Intelligence and Data Science | 83.07-84.64 | 83.07-84.64 |
| BE Civil Engineering | 67.22-67.22 | 65.31-67.22 |
| BE Instrumentation & Control Engineering | 60.32-70.87 | 60.32-77.16 |
KBTCOE MHT-CET Cutoff 2025 for DEFROBCS Category
BE Computer Engineering Cutoff for MHT-CET (DEFROBCS Category) expected to fall in the range between 72.31-81.49, which makes it the most in-demand course for KBTCOE. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for DEFROBCS Category with expected range of 65.04-65.04. You can check course wise expected MHT-CET 2025 cutoff for DEFROBCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 72.31-77.83 | 72.31-81.49 |
| BE Artificial Intelligence and Data Science | 65.04-65.04 | 65.04-65.04 |
| BE (Information Technology) | 59.86-71.48 | 59.86-71.48 |
| BE Electronics & Telecom Engineering | 36.03-55.07 | 36.03-55.07 |
| BE Instrumentation & Control Engineering | 22.17-22.17 | 22.17-22.17 |
| BE Robotics and Automation | 36.12-36.12 | 16.17-36.12 |
KBTCOE MHT-CET Cutoff 2025 for DEFSCS Category
BE (Information Technology) Cutoff for MHT-CET (DEFSCS Category) expected to fall in the range between 74.68-75.62, which makes it the most in-demand course for KBTCOE. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for DEFSCS Category with expected range of 68.48-75.36. You can check course wise expected MHT-CET 2025 cutoff for DEFSCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | - | 74.68-75.62 |
| BE Artificial Intelligence and Data Science | - | 68.48-75.36 |
| BE Electronics & Telecom Engineering | - | 63.29-77.95 |
| BE Mechanical Engineering | - | 46.76-54.18 |
| BE Computer Engineering | 45.36-45.36 | 45.36-77.21 |
| BE Civil Engineering | - | 31.93-31.93 |
KBTCOE MHT-CET Cutoff 2025 for DEFRNT3S Category
BE Computer Engineering Cutoff for MHT-CET (DEFRNT3S Category) expected to fall in the range between 71.66-71.66, which makes it the most in-demand course for KBTCOE. You can check course wise expected MHT-CET 2025 cutoff for DEFRNT3S Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 71.66-71.66 | 71.66-71.66 |
KBTCOE MHT-CET Cutoff 2025 for PWDOPENS Category
BE Computer Engineering Cutoff for MHT-CET (PWDOPENS Category) expected to fall in the range between 90.59-91.44, which makes it the most in-demand course for KBTCOE. Furthermore,BE Robotics and Automation is expected to be the second most preferred course for PWDOPENS Category with expected range of 84.3-84.3. You can check course wise expected MHT-CET 2025 cutoff for PWDOPENS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | - | 90.59-91.44 |
| BE Robotics and Automation | - | 84.3-84.3 |
| BE Electronics & Telecom Engineering | - | 82.14-85.45 |
| BE Electrical Engineering | - | 76.77-76.77 |
| BE Mechanical Engineering | - | 74.36-75.49 |
| BE Instrumentation & Control Engineering | - | 73.43-77.16 |
| BE Civil Engineering | 25.78-25.78 | 25.78-71.1 |
| BE Artificial Intelligence and Data Science | 25.78-25.78 | 25.78-89.67 |
| BE (Information Technology) | 7.32-7.32 | 7.32-90.86 |
KBTCOE MHT-CET Cutoff 2025 for ORPHAN Category
BE Computer Engineering Cutoff for MHT-CET (ORPHAN Category) expected to fall in the range between 89.71-91.13, which makes it the most in-demand course for KBTCOE. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for ORPHAN Category with expected range of 86.94-90.49. You can check course wise expected MHT-CET 2025 cutoff for ORPHAN Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | - | 89.71-91.13 |
| BE Artificial Intelligence and Data Science | - | 86.94-90.49 |
| BE (Information Technology) | - | 86.68-90.49 |
| BE Electronics & Telecom Engineering | - | 80.78-80.78 |
| BE Mechanical Engineering | - | 71.71-75.4 |
| BE Instrumentation & Control Engineering | - | 67.62-67.62 |
| BE Civil Engineering | - | 66.39-72.38 |
KBTCOE MHT-CET Cutoff 2025 for PWDOBCS Category
BE Computer Engineering Cutoff for MHT-CET (PWDOBCS Category) expected to fall in the range between 90.67-91.95, which makes it the most in-demand course for KBTCOE. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for PWDOBCS Category with expected range of 88.14-90.02. You can check course wise expected MHT-CET 2025 cutoff for PWDOBCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | - | 90.67-91.95 |
| BE Artificial Intelligence and Data Science | - | 88.14-90.02 |
| BE (Information Technology) | - | 87.93-90.86 |
| BE Electronics & Telecom Engineering | - | 84.48-84.48 |
| BE Instrumentation & Control Engineering | - | 77.84-77.84 |
| BE Mechanical Engineering | - | 76.25-81.8 |
| BE Civil Engineering | - | 68.11-75.19 |
KBTCOE MHT-CET Cutoff 2025 for GOPENH Category
BE Computer Engineering Cutoff for MHT-CET (GOPENH Category) expected to fall in the range between 88.28-91.25, which makes it the most in-demand course for KBTCOE. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GOPENH Category with expected range of 86.17-90.09. You can check course wise expected MHT-CET 2025 cutoff for GOPENH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 89.4-91.25 | 88.28-91.25 |
| BE (Information Technology) | 87.23-89.27 | 86.17-90.09 |
| BE Artificial Intelligence and Data Science | 85.92-85.92 | 84.95-89.52 |
| BE Electronics & Telecom Engineering | 77.06-78.88 | 52.45-83.89 |
| BE Instrumentation & Control Engineering | 57.21-58.14 | 36.44-73.25 |
| BE Civil Engineering | 44.98-45.95 | 31.77-92.48 |
| BE Mechanical Engineering | 51.1-59.86 | 17.66-81.51 |
KBTCOE MHT-CET Cutoff 2025 for GOPENO Category
BE Computer Engineering Cutoff for MHT-CET (GOPENO Category) expected to fall in the range between 88.14-90.9, which makes it the most in-demand course for KBTCOE. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GOPENO Category with expected range of 82.63-87.08. You can check course wise expected MHT-CET 2025 cutoff for GOPENO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 88.86-89.85 | 88.14-90.9 |
| BE (Information Technology) | 85.79-86.91 | 82.63-87.08 |
| BE Artificial Intelligence and Data Science | 83.39-83.39 | 82.23-83.39 |
| BE Electronics & Telecom Engineering | 61.89-78.04 | 58.05-78.04 |
| BE Instrumentation & Control Engineering | 38.84-48.26 | 36.42-58.55 |
| BE Civil Engineering | 27.15-45.46 | 7.78-88.75 |
| BE Mechanical Engineering | 35.65-42.92 | 2-54.7 |
KBTCOE MHT-CET Cutoff 2025 for GOBCO Category
BE (Information Technology) Cutoff for MHT-CET (GOBCO Category) expected to fall in the range between 84.74-86.87, which makes it the most in-demand course for KBTCOE. Furthermore,BE Computer Engineering is expected to be the second most preferred course for GOBCO Category with expected range of 82.32-90.13. You can check course wise expected MHT-CET 2025 cutoff for GOBCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | 85.79-86.87 | 84.74-86.87 |
| BE Computer Engineering | 88.28-89.4 | 82.32-90.13 |
| BE Artificial Intelligence and Data Science | 83.38-83.38 | 81.49-83.38 |
| BE Electronics & Telecom Engineering | 59.01-77.8 | 36.44-77.8 |
| BE Instrumentation & Control Engineering | 21.17-41.91 | 21.17-51.48 |
| BE Mechanical Engineering | 20.23-39.04 | 20.23-48.06 |
| BE Civil Engineering | 4.86-15.54 | 4.86-32.11 |
KBTCOE MHT-CET Cutoff 2025 for LSCH Category
BE Artificial Intelligence and Data Science Cutoff for MHT-CET (LSCH Category) expected to fall in the range between 69.66-69.66, which makes it the most in-demand course for KBTCOE. Furthermore,BE Computer Engineering is expected to be the second most preferred course for LSCH Category with expected range of 65.87-87.02. You can check course wise expected MHT-CET 2025 cutoff for LSCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Artificial Intelligence and Data Science | 69.66-69.66 | 69.66-69.66 |
| BE Computer Engineering | 81.51-87.02 | 65.87-87.02 |
| BE (Information Technology) | 71.12-79.26 | 64.16-79.26 |
| BE Instrumentation & Control Engineering | 39.79-39.79 | 20.57-39.91 |
| BE Mechanical Engineering | 20.57-20.57 | 20.57-24.54 |
| BE Electronics & Telecom Engineering | 20.23-58.74 | 20.23-63.65 |
KBTCOE MHT-CET Cutoff 2025 for GOBCH Category
BE Computer Engineering Cutoff for MHT-CET (GOBCH Category) expected to fall in the range between 87.7-90.52, which makes it the most in-demand course for KBTCOE. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for GOBCH Category with expected range of 84.43-84.52. You can check course wise expected MHT-CET 2025 cutoff for GOBCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 87.7-90.52 | 87.7-90.52 |
| BE Artificial Intelligence and Data Science | 84.52-84.52 | 84.43-84.52 |
| BE (Information Technology) | 84.01-88.59 | 84.01-88.59 |
| BE Electronics & Telecom Engineering | 63.65-77.42 | 59.35-79.28 |
| BE Mechanical Engineering | 30.42-53.17 | 30.42-59.92 |
| BE Instrumentation & Control Engineering | 30.3-55.9 | 22.89-71.27 |
| BE Civil Engineering | 32.59-44.86 | 19.26-87.55 |
KBTCOE MHT-CET Cutoff 2025 for LOPENH Category
BE Computer Engineering Cutoff for MHT-CET (LOPENH Category) expected to fall in the range between 89.24-91.91, which makes it the most in-demand course for KBTCOE. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LOPENH Category with expected range of 86.23-89.88. You can check course wise expected MHT-CET 2025 cutoff for LOPENH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 90.05-91.91 | 89.24-91.91 |
| BE (Information Technology) | 86.23-89.88 | 86.23-89.88 |
| BE Artificial Intelligence and Data Science | 86.04-86.04 | 86.04-89.18 |
| BE Electronics & Telecom Engineering | 69.66-81.03 | 69.04-82.77 |
| BE Instrumentation & Control Engineering | 50.61-70.28 | 50.61-70.28 |
| BE Civil Engineering | 32.26-51.14 | 32.26-92.05 |
| BE Mechanical Engineering | 23.22-44.05 | 23.22-53.17 |
KBTCOE MHT-CET Cutoff 2025 for GNT1O Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (GNT1O Category) expected to fall in the range between 46.17-67.57, which makes it the most in-demand course for KBTCOE. Furthermore,BE Civil Engineering is expected to be the second most preferred course for GNT1O Category with expected range of 31.65-44.48. You can check course wise expected MHT-CET 2025 cutoff for GNT1O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | 46.17-67.57 | 46.17-67.57 |
| BE Civil Engineering | 31.65-31.65 | 31.65-44.48 |
KBTCOE MHT-CET Cutoff 2025 for GNT3H Category
BE Computer Engineering Cutoff for MHT-CET (GNT3H Category) expected to fall in the range between 84.78-88.67, which makes it the most in-demand course for KBTCOE. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for GNT3H Category with expected range of 84.4-84.4. You can check course wise expected MHT-CET 2025 cutoff for GNT3H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 84.78-88.67 | 84.78-88.67 |
| BE Artificial Intelligence and Data Science | 84.4-84.4 | 84.4-84.4 |
| BE (Information Technology) | 83.12-85.04 | 83.12-85.04 |
| BE Electronics & Telecom Engineering | 67.75-76.62 | 55.57-76.62 |
| BE Instrumentation & Control Engineering | 36.42-42.51 | 19.26-42.51 |
| BE Mechanical Engineering | 17.65-54 | 17.65-54 |
| BE Civil Engineering | 19.25-44.86 | 0.98-44.86 |
KBTCOE MHT-CET Cutoff 2025 for LOBCH Category
BE Computer Engineering Cutoff for MHT-CET (LOBCH Category) expected to fall in the range between 88.96-91.22, which makes it the most in-demand course for KBTCOE. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for LOBCH Category with expected range of 85.48-85.48. You can check course wise expected MHT-CET 2025 cutoff for LOBCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 89.39-91.22 | 88.96-91.22 |
| BE Artificial Intelligence and Data Science | 85.48-85.48 | 85.48-85.48 |
| BE (Information Technology) | 85.31-89.23 | 85.31-89.23 |
| BE Electronics & Telecom Engineering | 64.16-79.78 | 64.16-86.37 |
| BE Instrumentation & Control Engineering | 41.19-69.22 | 41.19-69.22 |
| BE Civil Engineering | 32.2-44.19 | 23.12-48.97 |
| BE Mechanical Engineering | 9.75-37.69 | 9.75-37.69 |
KBTCOE MHT-CET Cutoff 2025 for LOBCO Category
BE Computer Engineering Cutoff for MHT-CET (LOBCO Category) expected to fall in the range between 86.2-90.18, which makes it the most in-demand course for KBTCOE. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LOBCO Category with expected range of 83.18-85.95. You can check course wise expected MHT-CET 2025 cutoff for LOBCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 86.2-90.18 | 86.2-90.18 |
| BE (Information Technology) | 83.44-85.95 | 83.18-85.95 |
| BE Civil Engineering | 33.08-42.3 | 33.08-42.3 |
| BE Electronics & Telecom Engineering | 72.12-81.02 | 28.77-81.02 |
| BE Instrumentation & Control Engineering | 23.69-47.39 | 23.69-47.39 |
| BE Mechanical Engineering | 8.28-20.36 | 8.28-25.46 |
KBTCOE MHT-CET Cutoff 2025 for GSCH Category
BE Computer Engineering Cutoff for MHT-CET (GSCH Category) expected to fall in the range between 75.91-87.12, which makes it the most in-demand course for KBTCOE. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for GSCH Category with expected range of 75.9-75.9. You can check course wise expected MHT-CET 2025 cutoff for GSCH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 75.91-81.03 | 75.91-87.12 |
| BE Artificial Intelligence and Data Science | 75.9-75.9 | 75.9-75.9 |
| BE (Information Technology) | 67.84-74.47 | 67.84-74.47 |
| BE Instrumentation & Control Engineering | 39.42-39.79 | 39.42-39.79 |
| BE Electronics & Telecom Engineering | 26.69-46.45 | 17.22-70.94 |
| BE Civil Engineering | 11.29-25.55 | 11.29-25.55 |
| BE Mechanical Engineering | 1.93-17.03 | 1.93-17.03 |
KBTCOE MHT-CET Cutoff 2025 for LOPENO Category
BE Computer Engineering Cutoff for MHT-CET (LOPENO Category) expected to fall in the range between 87.3-91.69, which makes it the most in-demand course for KBTCOE. Furthermore,BE (Information Technology) is expected to be the second most preferred course for LOPENO Category with expected range of 83.96-87.51. You can check course wise expected MHT-CET 2025 cutoff for LOPENO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 87.3-91.69 | 87.3-91.69 |
| BE (Information Technology) | 83.96-87.51 | 83.96-87.51 |
| BE Artificial Intelligence and Data Science | 85.48-85.48 | 83.39-85.48 |
| BE Electronics & Telecom Engineering | 74.58-82.17 | 59.01-82.17 |
| BE Instrumentation & Control Engineering | 23.68-75.48 | 23.68-75.48 |
| BE Civil Engineering | 8.81-46.17 | 8.81-46.17 |
| BE Mechanical Engineering | 20.92-27.33 | 1.58-31.5 |
KBTCOE MHT-CET Cutoff 2025 for GNT2H Category
BE Computer Engineering Cutoff for MHT-CET (GNT2H Category) expected to fall in the range between 82.77-88.75, which makes it the most in-demand course for KBTCOE. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GNT2H Category with expected range of 81.08-88.8. You can check course wise expected MHT-CET 2025 cutoff for GNT2H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 85.25-88.75 | 82.77-88.75 |
| BE (Information Technology) | 82.31-82.87 | 81.08-88.8 |
| BE Artificial Intelligence and Data Science | 76.64-76.64 | 76.64-76.64 |
| BE Electronics & Telecom Engineering | 55.49-71.83 | 55.49-73.64 |
| BE Civil Engineering | 24.13-25.27 | 24.13-25.27 |
| BE Instrumentation & Control Engineering | 23.85-54.52 | 23.85-54.52 |
| BE Mechanical Engineering | 5.12-47.35 | 5.12-66.24 |
KBTCOE MHT-CET Cutoff 2025 for GSTH Category
BE Computer Engineering Cutoff for MHT-CET (GSTH Category) expected to fall in the range between 71.06-72.7, which makes it the most in-demand course for KBTCOE. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GSTH Category with expected range of 45.85-86.01. You can check course wise expected MHT-CET 2025 cutoff for GSTH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 71.06-72.7 | 71.06-72.7 |
| BE (Information Technology) | 45.85-60.73 | 45.85-86.01 |
| BE Mechanical Engineering | 28.48-28.48 | 28.48-28.48 |
| BE Artificial Intelligence and Data Science | 16.94-16.94 | 16.94-16.94 |
| BE Electronics & Telecom Engineering | 8.18-58.87 | 8.18-58.87 |
| BE Civil Engineering | 6.65-41.13 | 6.65-41.13 |
KBTCOE MHT-CET Cutoff 2025 for LSCO Category
BE Computer Engineering Cutoff for MHT-CET (LSCO Category) expected to fall in the range between 72.96-87.93, which makes it the most in-demand course for KBTCOE. Furthermore,BE Civil Engineering is expected to be the second most preferred course for LSCO Category with expected range of 65.33-65.33. You can check course wise expected MHT-CET 2025 cutoff for LSCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 72.96-87.93 | 72.96-87.93 |
| BE Civil Engineering | - | 65.33-65.33 |
| BE (Information Technology) | 54.65-81.01 | 54.65-81.01 |
| BE Electronics & Telecom Engineering | 29.35-62.79 | 12.69-62.79 |
| BE Mechanical Engineering | 9.19-9.19 | 9.19-17.84 |
KBTCOE MHT-CET Cutoff 2025 for LNT2O Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (LNT2O Category) expected to fall in the range between 39.79-39.79, which makes it the most in-demand course for KBTCOE. You can check course wise expected MHT-CET 2025 cutoff for LNT2O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | 39.79-39.79 | 39.79-39.79 |
KBTCOE MHT-CET Cutoff 2025 for LVJO Category
BE Electronics & Telecom Engineering Cutoff for MHT-CET (LVJO Category) expected to fall in the range between 63.69-63.69, which makes it the most in-demand course for KBTCOE. You can check course wise expected MHT-CET 2025 cutoff for LVJO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Electronics & Telecom Engineering | 63.69-63.69 | 63.69-63.69 |
KBTCOE MHT-CET Cutoff 2025 for GSCO Category
BE Computer Engineering Cutoff for MHT-CET (GSCO Category) expected to fall in the range between 70.71-82.46, which makes it the most in-demand course for KBTCOE. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for GSCO Category with expected range of 67.95-67.95. You can check course wise expected MHT-CET 2025 cutoff for GSCO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 70.71-82.46 | 70.71-82.46 |
| BE Artificial Intelligence and Data Science | 67.95-67.95 | 67.95-67.95 |
| BE (Information Technology) | 59.35-78.07 | 59.35-78.71 |
| BE Electronics & Telecom Engineering | 21.15-55.89 | 21.15-55.89 |
| BE Mechanical Engineering | 11.1-11.1 | 11.1-45.85 |
| BE Instrumentation & Control Engineering | 9.49-9.49 | 9.49-39.91 |
| BE Civil Engineering | 5.37-5.37 | 5.37-5.37 |
KBTCOE MHT-CET Cutoff 2025 for LNT2H Category
BE (Information Technology) Cutoff for MHT-CET (LNT2H Category) expected to fall in the range between 80.99-80.99, which makes it the most in-demand course for KBTCOE. Furthermore,BE Computer Engineering is expected to be the second most preferred course for LNT2H Category with expected range of 76.05-79.81. You can check course wise expected MHT-CET 2025 cutoff for LNT2H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | 80.99-80.99 | 80.99-80.99 |
| BE Computer Engineering | 79.81-79.81 | 76.05-79.81 |
| BE Instrumentation & Control Engineering | 35.17-35.17 | 34.14-35.17 |
KBTCOE MHT-CET Cutoff 2025 for GVJH Category
BE (Information Technology) Cutoff for MHT-CET (GVJH Category) expected to fall in the range between 73.96-78, which makes it the most in-demand course for KBTCOE. Furthermore,BE Computer Engineering is expected to be the second most preferred course for GVJH Category with expected range of 72.64-81.51. You can check course wise expected MHT-CET 2025 cutoff for GVJH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | 73.96-78 | 73.96-78 |
| BE Computer Engineering | 72.64-81.51 | 72.64-81.51 |
| BE Electronics & Telecom Engineering | 58.98-60.08 | 58.98-60.08 |
| BE Instrumentation & Control Engineering | 49.55-49.55 | 49.55-49.55 |
| BE Mechanical Engineering | 33.82-37.69 | 5.39-37.69 |
| BE Civil Engineering | 13.19-44.48 | 1.42-44.48 |
KBTCOE MHT-CET Cutoff 2025 for LNT1H Category
BE Instrumentation & Control Engineering Cutoff for MHT-CET (LNT1H Category) expected to fall in the range between 46.45-46.45, which makes it the most in-demand course for KBTCOE. Furthermore,BE Civil Engineering is expected to be the second most preferred course for LNT1H Category with expected range of 1.42-1.42. You can check course wise expected MHT-CET 2025 cutoff for LNT1H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Instrumentation & Control Engineering | 46.45-46.45 | 46.45-46.45 |
| BE Civil Engineering | 1.42-1.42 | 1.42-1.42 |
KBTCOE MHT-CET Cutoff 2025 for LNT3H Category
BE Civil Engineering Cutoff for MHT-CET (LNT3H Category) expected to fall in the range between 42.55-42.55, which makes it the most in-demand course for KBTCOE. Furthermore,BE Instrumentation & Control Engineering is expected to be the second most preferred course for LNT3H Category with expected range of 26.05-26.05. You can check course wise expected MHT-CET 2025 cutoff for LNT3H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Civil Engineering | 42.55-42.55 | 42.55-42.55 |
| BE Instrumentation & Control Engineering | 26.05-26.05 | 26.05-26.05 |
KBTCOE MHT-CET Cutoff 2025 for PWDOPENH Category
BE Computer Engineering Cutoff for MHT-CET (PWDOPENH Category) expected to fall in the range between 77.06-77.06, which makes it the most in-demand course for KBTCOE. Furthermore,BE Mechanical Engineering is expected to be the second most preferred course for PWDOPENH Category with expected range of 74.19-74.19. You can check course wise expected MHT-CET 2025 cutoff for PWDOPENH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 77.06-77.06 | 77.06-77.06 |
| BE Mechanical Engineering | - | 74.19-74.19 |
| BE Instrumentation & Control Engineering | - | 69.66-69.66 |
| BE Artificial Intelligence and Data Science | 66.95-66.95 | 66.95-88.62 |
KBTCOE MHT-CET Cutoff 2025 for GNT1H Category
BE Computer Engineering Cutoff for MHT-CET (GNT1H Category) expected to fall in the range between 85.67-88.07, which makes it the most in-demand course for KBTCOE. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GNT1H Category with expected range of 75.71-84.88. You can check course wise expected MHT-CET 2025 cutoff for GNT1H Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 85.67-88.07 | 85.67-88.07 |
| BE (Information Technology) | 75.9-84.88 | 75.71-84.88 |
| BE Artificial Intelligence and Data Science | 84.95-84.95 | 73.27-84.95 |
| BE Electronics & Telecom Engineering | 52.01-53.92 | 52.01-53.92 |
| BE Mechanical Engineering | 12.79-32.49 | 12.79-32.49 |
| BE Instrumentation & Control Engineering | 10.51-20.17 | 10.51-20.17 |
| BE Civil Engineering | 5.69-18.84 | 5.69-18.84 |
KBTCOE MHT-CET Cutoff 2025 for LSTH Category
BE Computer Engineering Cutoff for MHT-CET (LSTH Category) expected to fall in the range between 55.21-79.95, which makes it the most in-demand course for KBTCOE. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for LSTH Category with expected range of 36.58-36.58. You can check course wise expected MHT-CET 2025 cutoff for LSTH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 55.21-79.95 | 55.21-79.95 |
| BE Artificial Intelligence and Data Science | 36.58-36.58 | 36.58-36.58 |
| BE Civil Engineering | 30.59-32.71 | 30.59-32.71 |
| BE (Information Technology) | 16.58-58.12 | 16.58-58.12 |
KBTCOE MHT-CET Cutoff 2025 for GSTO Category
BE Computer Engineering Cutoff for MHT-CET (GSTO Category) expected to fall in the range between 64.02-78.41, which makes it the most in-demand course for KBTCOE. Furthermore,BE Civil Engineering is expected to be the second most preferred course for GSTO Category with expected range of 34.27-55.02. You can check course wise expected MHT-CET 2025 cutoff for GSTO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 65.33-74.97 | 64.02-78.41 |
| BE Civil Engineering | 34.27-34.27 | 34.27-55.02 |
| BE (Information Technology) | 17.22-65.24 | 17.22-65.24 |
| BE Artificial Intelligence and Data Science | 6.19-6.19 | 6.19-6.19 |
KBTCOE MHT-CET Cutoff 2025 for LVJH Category
BE Computer Engineering Cutoff for MHT-CET (LVJH Category) expected to fall in the range between 81.86-81.86, which makes it the most in-demand course for KBTCOE. Furthermore,BE Artificial Intelligence and Data Science is expected to be the second most preferred course for LVJH Category with expected range of 63.69-63.69. You can check course wise expected MHT-CET 2025 cutoff for LVJH Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 81.86-81.86 | 81.86-81.86 |
| BE Artificial Intelligence and Data Science | 63.69-63.69 | 63.69-63.69 |
| BE Mechanical Engineering | 24.54-24.54 | 24.54-24.54 |
KBTCOE MHT-CET Cutoff 2025 for GVJO Category
BE Computer Engineering Cutoff for MHT-CET (GVJO Category) expected to fall in the range between 86.17-86.17, which makes it the most in-demand course for KBTCOE. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GVJO Category with expected range of 83-83. You can check course wise expected MHT-CET 2025 cutoff for GVJO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 86.17-86.17 | 86.17-86.17 |
| BE (Information Technology) | 83-83 | 83-83 |
| BE Civil Engineering | 32.49-32.49 | 32.49-32.49 |
| BE Mechanical Engineering | 17.43-17.85 | 17.43-61.43 |
KBTCOE MHT-CET Cutoff 2025 for GNT2O Category
BE Computer Engineering Cutoff for MHT-CET (GNT2O Category) expected to fall in the range between 79.59-79.59, which makes it the most in-demand course for KBTCOE. Furthermore,BE (Information Technology) is expected to be the second most preferred course for GNT2O Category with expected range of 70.92-79.46. You can check course wise expected MHT-CET 2025 cutoff for GNT2O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Computer Engineering | 79.59-79.59 | 79.59-79.59 |
| BE (Information Technology) | 70.92-79.46 | 70.92-79.46 |
| BE Electronics & Telecom Engineering | 19.79-19.79 | 19.79-19.79 |
| BE Civil Engineering | 12.38-12.38 | 12.38-12.38 |
| BE Mechanical Engineering | 11.29-36.58 | 11.29-36.58 |
KBTCOE MHT-CET Cutoff 2025 for DEFRSCS Category
BE Artificial Intelligence and Data Science Cutoff for MHT-CET (DEFRSCS Category) expected to fall in the range between 63.69-63.69, which makes it the most in-demand course for KBTCOE. Furthermore,BE (Information Technology) is expected to be the second most preferred course for DEFRSCS Category with expected range of 62.49-62.49. You can check course wise expected MHT-CET 2025 cutoff for DEFRSCS Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Artificial Intelligence and Data Science | - | 63.69-63.69 |
| BE (Information Technology) | 62.49-62.49 | 62.49-62.49 |
| BE Computer Engineering | 58.55-58.55 | 58.55-58.55 |
KBTCOE MHT-CET Cutoff 2025 for GNT3O Category
BE (Information Technology) Cutoff for MHT-CET (GNT3O Category) expected to fall in the range between 78-78, which makes it the most in-demand course for KBTCOE. Furthermore,BE Mechanical Engineering is expected to be the second most preferred course for GNT3O Category with expected range of 41.91-52.23. You can check course wise expected MHT-CET 2025 cutoff for GNT3O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | 78-78 | 78-78 |
| BE Mechanical Engineering | 41.91-41.91 | 41.91-52.23 |
KBTCOE MHT-CET Cutoff 2025 for LNT1O Category
BE (Information Technology) Cutoff for MHT-CET (LNT1O Category) expected to fall in the range between 79.79-79.79, which makes it the most in-demand course for KBTCOE. You can check course wise expected MHT-CET 2025 cutoff for LNT1O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | 79.79-79.79 | 79.79-79.79 |
KBTCOE MHT-CET Cutoff 2025 for LSTO Category
BE (Information Technology) Cutoff for MHT-CET (LSTO Category) expected to fall in the range between 42.3-42.3, which makes it the most in-demand course for KBTCOE. You can check course wise expected MHT-CET 2025 cutoff for LSTO Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE (Information Technology) | 42.3-42.3 | 42.3-42.3 |
KBTCOE MHT-CET Cutoff 2025 for LNT3O Category
BE Mechanical Engineering Cutoff for MHT-CET (LNT3O Category) expected to fall in the range between 7.55-7.55, which makes it the most in-demand course for KBTCOE. You can check course wise expected MHT-CET 2025 cutoff for LNT3O Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Mechanical Engineering | 7.55-7.55 | 7.55-7.55 |
KBTCOE MHT-CET Cutoff 2025 for AI Category
BE Instrumentation & Control Engineering Cutoff for MHT-CET (AI Category) expected to fall in the range between 21.51-21.51, which makes it the most in-demand course for KBTCOE. Furthermore,BE Civil Engineering is expected to be the second most preferred course for AI Category with expected range of 8.39-8.39. You can check course wise expected MHT-CET 2025 cutoff for AI Category in below table:
| Course | Round 1 Closing percentile (Expected Range) | Closing percentile (Expected Range) |
|---|---|---|
| BE Instrumentation & Control Engineering | - | 21.51-21.51 |
| BE Civil Engineering | - | 8.39-8.39 |
Also Check:
.png?h=132&w=263&mode=stretch)
.png?h=132&w=263&mode=stretch)
 (1).png?h=132&w=263&mode=stretch)
.png?h=78&w=78&mode=stretch)
.png?h=72&w=72&mode=stretch)
.png?h=72&w=72&mode=stretch)
Comments