JEE Main 2026 Exam Centres in Maharashtra

JEE Main 2026 Exam Centers in Maharashtra has been released by NTA on its official website jeemain.nta.ac.in. During JEE Main Registration, candidates can choose up to 4 exam cities. The JEE Main 2026 exam will be held across 284 city locations in India and 15 city locations outside India.

Latest Update:- JEE Main 2026 Session 1 City Intimation Slip out, Download Here

You must carefully examine the list of the JEE Main exam center locations to know the names of test cities nearest or most convenient to you. NTA will inform you of the allotted test center through the JEE Main intimation slip. Moreover, you should check the JEE Main 2026 admit card to know your test center’s exact address.

The list of JEE Main Exam Centres in Maharashtra 2026 includes Ahmednagar, Akola, Amravati, Chhatrapati Sambhaji Nagar, Chandrapur, Dhule, Jalgaon, Kolhapur, Latur, Nagpur, Nanded, Nashik, Pune, Sangli, Satara, Mumbai/ Navi Mumbai etc. Candidates who are appearing for the JEE Main 2026 from Maharashtra must check the list of JEE Main Exam Centres in Maharashtra to ease the arrangements for the exam day. In 2024, JEE Main was held in 301 test centers, which was reduced to 284 in 2026. Some other important facts for JEE Main Exam Centers and JEE Main 2026 Seat Allotment are:

In 2024, the exam was held in 24 cities across 23 countries, but in 2026, JEE Mains will be conducted in just 15 cities across 13 countries.
Internationally, several centers have been removed, including those in Canada, Sri Lanka, and Russia.
Other countries, such as Bahrain, Indonesia, Kuwait, Malaysia, and the USA, will continue to host the exam, while some cities in Indonesia, like Jakarta, have been replaced by West Java as the exam location.

Check Latest about JEE Mains:

List of JEE Main Exam Centers in Maharashtra 2026

In Maharashtra, the JEE Main 2026 exam centers will be located across 27 cities, as below:

City	Code
Ahmednagar	MR01
Akola	MR02
Amravati	MR03
Chhatrapati Sambhaji Nagar	MR04
Chandrapur	MR09
Dhule	MR10
Jalgaon	MR13
Kolhapur	MR14
Latur	MR15
Nagpur	MR17
Nanded	MR18
Nashik	MR19
Pune	MR22
Sangali	MR25
Satara	MR26
Solapur	MR27
Thane	MR28
Wardha	MR29
Beed	MR30
Bhandara	MR31
Buldhana	MR32
Ratnagiri	MR33
Yavatmal	MR34
Parbhani	MR38
Gadchiroli	MR40
Jalna	MR42
Mumbai/ Navi Mumbai	MR43

Also Check:

JEE Main Exam Day Guidelines	Top Engineering Colleges in India Accepting JEE Main
JEE Main Cutoff	JEE Main Result

JEE Main Deleted Exam Centers in Maharashtra

State	City	City Code
Maharashtra	Gondia	MR35
Maharashtra	Nandurbar	MR36
Maharashtra	Raigad	MR23
Maharashtra	Sindhudurg	MR39

Check How to Prepare for JEE Main?

JEE Main 2026 City Intimation Slip and Admit Card

JEE Main 2026 city intimation slip has been released by NTA on its official website. City intimation slip for JEE Main 2026 contains details such as JEE Main exam state, city and exam date. Whereas JEE Main 2026 Admit Card will contain details such as reporting time, alloted exam date and timings, test centre along with the address and exam day guidelines.

Event	Date
City Intimation Slip Release	January 8, 2026 (Out)
Admit Card Release	January 18, 2026
Exam Dates	January 21, 23, 24, 28, 29, and 30, 2026

Detailed Exam Schedule for JEE Main 2026

Events	First Shift	Second Shift
Entry in the Examination Centre/Hall/Room, physical frisking, document verification; Invigilators record manual attendance and Biometric registration desk; Cross-checking of admit card, signature and photo match, to be completed by the invigilator	7:00 AM to 8:30 AM	1:00 PM to 2:30 PM
Instructions by the Invigilators	8:30 AM to 8:50 AM	2:30 to 2:50 PM
Candidates login to read Instructions	8:50 AM	2:50 PM
Exam Timings	9:00 AM to 12:00 PM	3:00 PM to 6:00 PM

JEE Main Questions

1.
The speed of a longitudinal wave in a metallic bar is \(400\,\text{m/s}\). If the density and Young’s modulus of the bar material increase by \(0.5%\) and \(1%\) respectively, then the speed of the wave is changed approximately to _______ m/s.

\(399\)
\(398\)
\(402\)
\(401\)

View Solution

2.
Consider an equilateral prism (refractive index \( \sqrt{2} \)). A ray of light is incident on its one surface at a certain angle \( i \). If the emergent ray is found to graze along the other surface, then the angle of refraction at the incident surface is close to

\(15^\circ\)
\(40^\circ\)
\(20^\circ\)
\(30^\circ\)

View Solution

3.
A 1 m long metal rod AB completes the circuit as shown in figure. The area of circuit is perpendicular to the magnetic field of 0.10 T. If the resistance of the total circuit is 2 \(\Omega\) then the force needed to move the rod towards right with constant speed (v) of 1.5 m/s is _____ N.

\(5.7 \times 10^{-2}\)
\(7.5 \times 10^{-3}\)
\(7.5 \times 10^{-2}\)
\(5.7 \times 10^{-3}\)

View Solution

4.
A block of mass \(5\) kg is moving on an inclined plane which makes an angle of \(30^\circ\) with the horizontal. The coefficient of friction between the block and the inclined plane surface is \(\dfrac{\sqrt{3}}{2}\). The force to be applied on the block so that the block moves {down the plane without acceleration is ________ N. (\( g = 10 \, \text{m s}^{-2} \))}

\(7.5\)
\(15\)
\(25\)
\(12.5\)

View Solution

5.
For a transparent prism, if the angle of minimum deviation is equal to its refracting angle, the refractive index \(n\) of the prism satisfies:

\(\sqrt{2}<n<2\)
\(\sqrt{2}<n<2\sqrt{2}\)
\(n\ge 2\)
\(1<n<2\)

View Solution

6.
Net gravitational force at the center of a square is found to be \( F_1 \) when four particles having masses \( M, 2M, 3M \) and \( 4M \) are placed at the four corners of the square as shown in figure, and it is \( F_2 \) when the positions of \( 3M \) and \( 4M \) are interchanged. The ratio \( \dfrac{F_1}{F_2} = \dfrac{\alpha}{\sqrt{5}} \). The value of \( \alpha \) is

1
3
\( 2\sqrt{5} \)
2

View Solution

JEE Main 2026 Exam Centres in Maharashtra

List of JEE Main Exam Centers in Maharashtra 2026

JEE Main Deleted Exam Centers in Maharashtra

Detailed Exam Schedule for JEE Main 2026

JEE Main Questions

1.
The speed of a longitudinal wave in a metallic bar is \(400\,\text{m/s}\). If the density and Young’s modulus of the bar material increase by \(0.5%\) and \(1%\) respectively, then the speed of the wave is changed approximately to _______ m/s.

2.
Consider an equilateral prism (refractive index \( \sqrt{2} \)). A ray of light is incident on its one surface at a certain angle \( i \). If the emergent ray is found to graze along the other surface, then the angle of refraction at the incident surface is close to

3.
A 1 m long metal rod AB completes the circuit as shown in figure. The area of circuit is perpendicular to the magnetic field of 0.10 T. If the resistance of the total circuit is 2 \(\Omega\) then the force needed to move the rod towards right with constant speed (v) of 1.5 m/s is _____ N.

5.
For a transparent prism, if the angle of minimum deviation is equal to its refracting angle, the refractive index \(n\) of the prism satisfies:

Comments

SUBSCRIBE TO OUR NEWS LETTER

List of JEE Main Exam Centers in Maharashtra 2026

JEE Main Deleted Exam Centers in Maharashtra

Detailed Exam Schedule for JEE Main 2026

JEE Main Questions

1.The speed of a longitudinal wave in a metallic bar is \(400\,\text{m/s}\). If the density and Young’s modulus of the bar material increase by \(0.5%\) and \(1%\) respectively, then the speed of the wave is changed approximately to _______ m/s.

2.Consider an equilateral prism (refractive index \( \sqrt{2} \)). A ray of light is incident on its one surface at a certain angle \( i \). If the emergent ray is found to graze along the other surface, then the angle of refraction at the incident surface is close to

3.A 1 m long metal rod AB completes the circuit as shown in figure. The area of circuit is perpendicular to the magnetic field of 0.10 T. If the resistance of the total circuit is 2 \(\Omega\) then the force needed to move the rod towards right with constant speed (v) of 1.5 m/s is _____ N.

5.For a transparent prism, if the angle of minimum deviation is equal to its refracting angle, the refractive index \(n\) of the prism satisfies:

Comments

SUBSCRIBE TO OUR NEWS LETTER

1.
The speed of a longitudinal wave in a metallic bar is \(400\,\text{m/s}\). If the density and Young’s modulus of the bar material increase by \(0.5%\) and \(1%\) respectively, then the speed of the wave is changed approximately to _______ m/s.

2.
Consider an equilateral prism (refractive index \( \sqrt{2} \)). A ray of light is incident on its one surface at a certain angle \( i \). If the emergent ray is found to graze along the other surface, then the angle of refraction at the incident surface is close to

3.
A 1 m long metal rod AB completes the circuit as shown in figure. The area of circuit is perpendicular to the magnetic field of 0.10 T. If the resistance of the total circuit is 2 \(\Omega\) then the force needed to move the rod towards right with constant speed (v) of 1.5 m/s is _____ N.

5.
For a transparent prism, if the angle of minimum deviation is equal to its refracting angle, the refractive index \(n\) of the prism satisfies: