NEET PYQs for Heat Transfer with Solutions: Practice NEET Previous Year Questions

Updated 3+ months ago

Heat Transfer is an important topic in the Physics section in NEET exam. Practising this topic will increase your score overall and make your conceptual grip on NEET exam stronger.

This article gives you a full set of NEET PYQs for Heat Transfer with explanations for effective preparation. Practice of NEET Physics PYQs including Heat Transfer questions regularly will improve accuracy, speed, and confidence in the NEET 2026 exam.

NEET PYQs for Heat Transfer with Solutions

1.
Given below are two statements: One is labelled as Assertion A and the other is labelled as Reason R.
Assertion A: Houses made of concrete roofs overlaid with foam keep the room hotter during summer.
Reason R: The layer of foam insulation prohibits heat transfer, as it contains air pockets.
In the light of the above statements, choose the correct answer from the options given below.
- A is true but R is false.
- A is false but R is true.
- Both A and R are true and R is the correct explanation of A.
- Both A and R true but R is NOT the correct explanation of A.
View Solution
2.
Heat is flowing through two cylindrical rods of the same material. The diameters of the rods are in the ratio 1 : 2 and the lengths in the ratio 2 : 1. If the temperature difference between the ends is same, then ratio of the rate of flow of heat through them will be
- 2:1
- 8:1
- 1:1
- 1:8
View Solution
3.
A black body has wavelength $\lambda_m$ corresponding to maximum energy at 2000 K. Its wavelength corresponding to maximum energy at 3000 K will be:
- $\frac{3}{2} \lambda_m$
- $\frac{2}{3} \lambda_m$
- $\frac{16}{81} \lambda_m$
- $\frac{81}{16} \lambda_m$
View Solution
4.
Steam at 100°C is passed into 20 g of water at 10°C. When water acquires a temperature of 80°C, the mass of water present will be:
[Take specific heat of water = 1 cal g^-1°C^-1 and latent heat of steam = 540 cal g^-1]
- 31.5g
- 42.5g
- 22.5g
- 24g
View Solution
5.
The diagrams below show regions of equipotentials.
A positive charge is moved from A to B in each diagram.
- Maximum work is required to move q in figure (c).
- In all the four cases the work done is the same.
- Minimum work is required to move q in figure (a).
- Maximum work is required to move q in figure (b).
View Solution
6.
The two ends of a metal rod are maintained at temperatures 100$^{\circ}$C and 110$^{\circ}$C. The rate of heat flow in the rod is found to be 4.0 J/s. If the end are maintained at temperatures 200$^{\circ}$C and 210$^{\circ}$C, the rate of heat flow will be
- 8.0 J/s
- 4.0 J/s
- 44.0 J/s
- 16.8 J/s
View Solution
7.
A black body has maximum wavelength 1 m at 2000 K. Its corresponding wavelength at 3000 K will be
- $ \frac{3}{2} \lambda m $
- $ \frac{2}{3} \lambda m $
- $ \frac{16}{81} \lambda m $
- $ \frac{81}{16} \lambda m $
View Solution
8.
A black body at $227^{\circ} C$ radiates heat at the rate of $7\, cals / cm ^{2} s$. At a temperature of $727^{\circ} C$, the rate of heat radiated in the same units will be :
- 50
- 112
- 80
- 60
View Solution
9.
The two ends of a rod of length $L$ and a uniform cross-sectional area $A$ are kept at two temperatures $T_1$ and $T_2 (T_1 > T_2).$ The rate of heat transfer, through the rod in a steady state is given by :
- $ \frac{ dQ}{dt}= \frac{ k(T_1 -T_2)}{LA}$
- $ \frac{ dQ}{dt}= k LA(T_1 -T_2)$
- $ \frac{ dQ}{dt}= \frac{ kA(T_1 -T_2)}{L}$
- $ \frac{ dQ}{dt}= \frac{ kL(T_1 -T_2)}{A}$
View Solution
10.
A deep rectangular pond of surface are A, containing water (density = r, specific heat capacity = s), is located in a region where the outside air temperature is at a steady value of -26°C. The thickness of the frozen ice layer in this pond, at a certain instant is x. Taking the thermal conductivity of ice as K, and its specific latent heat of fusion as L, the rate of increase of the thickness of ice layer, at this instant would be given by :-
- $\frac {26K}{\rho r\left(L-4s\right)}$
- $\frac {6K}{\left(\rho x^{2}-L\right)}$
- $\frac {26K}{\left(\rho xL\right)}$
- $\frac {26K}{\rho r\left(L+4s\right)}$
View Solution

View more NEET Questions

SHARE ON FACEBOOK SHARE ON TWITTER

Comments

No Comments To Show

SUBSCRIBE TO OUR NEWS LETTER

COLLEGE NOTIFICATIONS

EXAM NOTIFICATIONS

NEWS UPDATES

Download the Collegedunia app on

NEET PYQs for Heat Transfer with Solutions

2.Heat is flowing through two cylindrical rods of the same material. The diameters of the rods are in the ratio 1 : 2 and the lengths in the ratio 2 : 1. If the temperature difference between the ends is same, then ratio of the rate of flow of heat through them will be

3.A black body has wavelength $\lambda_m$ corresponding to maximum energy at 2000 K. Its wavelength corresponding to maximum energy at 3000 K will be:

4.Steam at 100°C is passed into 20 g of water at 10°C. When water acquires a temperature of 80°C, the mass of water present will be:[Take specific heat of water = 1 cal g-1°C-1 and latent heat of steam = 540 cal g-1]

5.The diagrams below show regions of equipotentials.A positive charge is moved from A to B in each diagram.

6.The two ends of a metal rod are maintained at temperatures 100$^{\circ}$C and 110$^{\circ}$C. The rate of heat flow in the rod is found to be 4.0 J/s. If the end are maintained at temperatures 200$^{\circ}$C and 210$^{\circ}$C, the rate of heat flow will be

7.A black body has maximum wavelength 1 m at 2000 K. Its corresponding wavelength at 3000 K will be

8.A black body at $227^{\circ} C$ radiates heat at the rate of $7\, cals / cm ^{2} s$. At a temperature of $727^{\circ} C$, the rate of heat radiated in the same units will be :

9.The two ends of a rod of length $L$ and a uniform cross-sectional area $A$ are kept at two temperatures $T_1$ and $T_2 (T_1 > T_2).$ The rate of heat transfer, through the rod in a steady state is given by :

Comments

SUBSCRIBE TO OUR NEWS LETTER

2.
Heat is flowing through two cylindrical rods of the same material. The diameters of the rods are in the ratio 1 : 2 and the lengths in the ratio 2 : 1. If the temperature difference between the ends is same, then ratio of the rate of flow of heat through them will be

3.
A black body has wavelength $\lambda_m$ corresponding to maximum energy at 2000 K. Its wavelength corresponding to maximum energy at 3000 K will be:

4.
Steam at 100°C is passed into 20 g of water at 10°C. When water acquires a temperature of 80°C, the mass of water present will be:
[Take specific heat of water = 1 cal g^-1°C^-1 and latent heat of steam = 540 cal g^-1]

5.
The diagrams below show regions of equipotentials.
A positive charge is moved from A to B in each diagram.

6.
The two ends of a metal rod are maintained at temperatures 100$^{\circ}$C and 110$^{\circ}$C. The rate of heat flow in the rod is found to be 4.0 J/s. If the end are maintained at temperatures 200$^{\circ}$C and 210$^{\circ}$C, the rate of heat flow will be

7.
A black body has maximum wavelength 1 m at 2000 K. Its corresponding wavelength at 3000 K will be

8.
A black body at $227^{\circ} C$ radiates heat at the rate of $7\, cals / cm ^{2} s$. At a temperature of $727^{\circ} C$, the rate of heat radiated in the same units will be :

9.
The two ends of a rod of length $L$ and a uniform cross-sectional area $A$ are kept at two temperatures $T_1$ and $T_2 (T_1 > T_2).$ The rate of heat transfer, through the rod in a steady state is given by :